Ford Power Stroke V8 6.7L Remanufactured Engine For Sale
Premium remanufactured Ford Power Stroke V8 6.7L diesel engine available for sale starting at $5,800. Every engine is completely disassembled, cleaned, inspected, and rebuilt to meet or exceed original Ford specifications. Dyno tested with a 1-year unlimited mileage warranty.
This engine fits 4+ vehicle models (2017-2026).
| Manufacturer | Ford |
|---|---|
| Engine Series | Power Stroke V8 |
| Displacement | 6.7L |
| Fuel Type | DIESEL |
| Cylinders | 8 |
| Fits | 2021 Ford F-450 Super Duty (Pickup Truck) |
| Condition | Remanufactured (Long Block) |
| Warranty | 1-Year Unlimited Mileage |
| Shipping | Nationwide Shipping Available |
Price: $5,800
Call (631) 991-7700 for a quote or request a quote online.
Ford Power Stroke V8 6.7L Technical Specifications & Engineering Deep Dive
The Ford Power Stroke V8 6.7L is a V8, pushrod OHV with 32 valves diesel engine designed for medium-duty applications requiring a balance of power, efficiency, and longevity. The 6.7L Power Stroke was Ford's first in-house diesel design, engineered specifically for the Super Duty platform with unique features like reverse-flow heads and inboard exhaust to optimize packaging, emissions, and serviceability.
Core Engine Specifications
| Architecture | V8, pushrod OHV with 32 valves |
|---|---|
| Bore x Stroke | 99mm x 108mm (3.90" x 4.25") |
| Compression Ratio | 16.2:1 |
| Fuel Injection | Bosch CP4.2 high-pressure common rail (29,000 PSI) / Piezo injectors |
| Aspiration | Garrett GT32 single sequential turbocharger (6.7L) / compound turbo (6.4L) |
| Block Material | Compacted graphite iron (CGI) V-block |
| Head Material | Aluminum alloy reverse-flow heads |
| Valvetrain | Pushrod with roller followers, 4 valves per cylinder |
| Firing Order | 1-3-7-2-6-5-4-8 |
| Oil Capacity | 13 quarts |
| Coolant Capacity | 6.5 gallons |
| Dry Weight | Approximately 1,070 lbs |
| Horsepower Range | 330-475 HP |
| Torque Range | 750-1,050 lb-ft |
| Production Years | 2011-present (6.7L) |
Key Engineering Features
- First diesel engine designed in-house by Ford
- Reverse-flow aluminum cylinder heads for weight savings
- Inboard exhaust for faster catalyst light-off
- Cab-mounted fuel filter for easy service access
Critical Performance Specifications
- 475 HP and 1,050 lb-ft (2020+ High Output)
- Oil change interval 10,000-15,000 miles
- Integrated exhaust brake
- 36,000 PSI fuel injection pressure (2020+)
- Structural oil pan for chassis rigidity
Competing Engines in This Class
The Ford Power Stroke V8 6.7L competes directly with Cummins 6.7L ISB (RAM), GM Duramax L5P 6.6L in the medium-duty commercial segment. Each engine has its strengths, but the Ford Power Stroke V8 is known for the best balance of power, efficiency, and long-term reliability in its class.
Our Ford Power Stroke V8 6.7L Remanufacturing Process — Complete 9-Step Breakdown
Our remanufacturing process for the Ford Power Stroke V8 6.7L goes far beyond a simple rebuild. While a "rebuilt" engine only replaces obviously worn parts (leaving near-end-of-life components in place), our remanufacturing process returns every component to original equipment manufacturer specifications — or better. This is the same standard used by Ford when producing a brand-new engine. Here is exactly what happens to every Ford Power Stroke V8 during our comprehensive process:
- Complete Disassembly: Every component is removed from the engine block and cataloged. Bolts, studs, and fasteners are inspected for stretch and fatigue. The bare block, crankshaft, connecting rods, cylinder heads, and all internal components are separated for individual inspection.
- Cleaning & Crack Inspection: The block undergoes hot tank chemical cleaning to remove all carbon, oil deposits, and scale. After cleaning, magnetic particle inspection (MPI) detects surface cracks in ferrous components, while dye-penetrant testing checks aluminum parts. Any component with cracks is rejected.
- Precision Block Machining: The deck surface is milled to within 0.001" flatness tolerance. Cylinder bores are honed with torque plates installed (simulating head bolt stress) to achieve the exact crosshatch pattern needed for proper ring seating. Main bearing saddles are align-honed to ensure perfect crankshaft alignment.
- Crankshaft Reconditioning: The crankshaft is ground and polished to achieve a 4-8 microinch Ra surface finish on all journals. Each journal is measured in multiple planes to verify roundness within 0.0001". The crankshaft is then dynamically balanced to reduce vibration and bearing wear.
- Cylinder Head Reconditioning: Heads are pressure tested at 60 PSI to verify no internal cracks or porosity. Valve seats receive a precision 3-angle valve job for optimal sealing. Valve guides are replaced if worn beyond specification. Springs are tested for proper tension and replaced if below spec.
- Assembly with New Components: The engine is assembled with all-new pistons, piston rings, main and rod bearings, gasket sets, seals, timing components, and oil pump. All components are verified against OEM part numbers and specifications before installation.
- Torque Verification: Every critical fastener is torqued using calibrated equipment following the exact OEM torque sequence and values. Head bolts, main cap bolts, connecting rod bolts, and flywheel bolts all receive documented torque verification.
- Dynamometer Testing: The completed engine is run on our dynamometer to verify horsepower output, torque curve, oil pressure at all RPM ranges, fuel consumption, and absence of leaks. The engine must meet or exceed factory specifications before passing.
- Final Inspection & Shipping Prep: After passing dyno testing, the engine receives a final visual inspection, all openings are sealed against moisture and contamination, rust-preventive oil is applied to all exposed surfaces, and the engine is mounted on a shipping pallet with protective wrapping.
This complete remanufacturing process is why we can confidently offer a 1-year unlimited mileage warranty on every Ford Power Stroke V8 long block. We know exactly what condition every internal component is in because we inspected, measured, and either replaced or restored each one to specification. There are no unknown variables — unlike a used or rebuilt engine where worn components may fail unpredictably.
What's Included in Our Ford Power Stroke V8 Long Block
Every remanufactured Ford Power Stroke V8 long block includes:
- Remanufactured block (machined to OEM tolerances)
- New pistons and piston rings (matched set)
- New main bearings and rod bearings
- Remanufactured crankshaft (ground and polished)
- Remanufactured connecting rods (resized and magna-fluxed)
- Remanufactured cylinder head(s) (pressure tested, new valves/springs/guides as needed)
- New camshaft and lifters (or verified within spec)
- New timing gear set / timing chain
- New oil pump
- Complete gasket set and all seals
- New freeze plugs and expansion plugs
Not included (transfer from your old engine): Turbocharger, fuel injectors, injection pump/rail, intake/exhaust manifolds, alternator, starter, water pump, A/C compressor, power steering pump, wiring harness, ECM/ECU, and all external accessories.
Ford Power Stroke V8 6.7L Applications & Vehicle Compatibility
The Ford Power Stroke V8 6.7L powers the 2021 Ford F-450 Super Duty and many other vehicles in its class. This engine platform has proven itself through millions of miles of real-world service in demanding conditions.
Common Vehicle Applications
- Ford F-250, F-350, F-450 Super Duty
- Ford F-550, F-600 chassis cabs
- Ford E-Series cutaway
Our remanufactured Ford Power Stroke V8 long block is a direct bolt-in replacement that uses all of your existing accessories, wiring harness, and emissions equipment. This eliminates the need for custom fabrication or adapter kits — saving significant installation time and labor costs. The engine mounts, bellhousing pattern, and accessory drive are all identical to your original engine.
For fleet operators and owner-operators who need to get back on the road quickly, our remanufactured Ford Power Stroke V8 eliminates the uncertainty of a used engine while costing 40-60% less than a brand-new unit from the dealer. Most orders ship within 24-48 hours with delivery in 3-7 business days.
Ford Power Stroke V8 6.7L Maintenance Schedule & Longevity Guide
Proper maintenance is the single most important factor in determining how long your remanufactured Ford Power Stroke V8 6.7L engine will last. With correct maintenance following the schedule below, a remanufactured Ford Power Stroke V8 should deliver 250,000 to 400,000+ miles of reliable service — essentially the same life expectancy as a brand-new engine from the factory.
Recommended Maintenance Schedule
| Service Item | Interval | Details |
|---|---|---|
| Engine oil and filter change | Every 7,500-15,000 miles | Use CK-4 rated oil in the viscosity recommended by the manufacturer. Synthetic oils can extend drain intervals when supported by oil analysis. |
| Fuel filter replacement | Every 15,000-30,000 miles | Replace fuel filter to prevent injector damage from contamination. Use OEM-spec filters only. |
| Air filter replacement | Every 30,000 miles or as indicated | A restricted air filter reduces power and increases fuel consumption. Check restriction indicator if equipped. |
| Coolant service | Every 50,000 miles | Flush and refill with manufacturer-specified coolant. Check hoses, clamps, and water pump for leaks. |
| Serpentine belt and tensioner | Every 100,000 miles | Inspect for cracking, glazing, or chunk-out. Replace tensioner if spring tension is weak. |
| Turbocharger service | Every 150,000 miles | Inspect for shaft play, oil leaks, and boost pressure. Clean VGT vanes if equipped. |
Critical Break-In Procedure (First 500 Miles)
The first 500 miles are the most critical period for your remanufactured engine's long-term performance and longevity. During this break-in period, new piston rings are seating against freshly honed cylinder walls, and new bearings are conforming to their journals. Follow these guidelines strictly:
- Vary engine speed and load — Do not cruise at a constant RPM. Varying speed helps rings seat evenly across the entire cylinder bore.
- Avoid sustained high RPM — Keep RPM below 3,000 RPM for the first 500 miles.
- Avoid heavy towing or maximum load — Keep loads to 50% capacity for the first 1,000 miles.
- Monitor oil pressure and temperature — Watch for any abnormal readings that could indicate a problem.
- Change oil at 500 miles — This removes initial break-in wear particles and metal fines from the oil system.
- Check for leaks daily — Minor seepage at gasket surfaces may occur during initial thermal cycling and is normal if it stops within the first 100 miles.
Ford Power Stroke V8 6.7L Cost of Ownership: Remanufactured vs New vs Used vs Rebuilt
When your 2021 Ford F-450 Super Duty needs a new engine, you have four primary options. Understanding the true cost of each option — including warranty coverage, expected lifespan, and risk of failure — is essential for making the right decision. Here is how a remanufactured Ford Power Stroke V8 compares to the alternatives:
| Option | Typical Cost | Warranty | Expected Life | Risk Level |
|---|---|---|---|---|
| Repair existing engine | $5,000-$15,000 | 90 days (labor only) | Varies widely | High — other worn components remain |
| Used/junkyard engine | $3,000-$8,000 | 30-90 days | Unknown | Very High — unknown history |
| Rebuilt engine | $6,000-$14,000 | 6-12 months / limited miles | 200,000-400,000 mi | Medium — near-end-of-life parts remain |
| Remanufactured long block | $7,000-$16,000 | 1 year / unlimited miles | 250,000-400,000 mi | Low — all components at OEM spec |
| Brand new from dealer | $15,000-$30,000 | 2-5 years | 300,000-500,000 mi | Lowest |
A remanufactured Ford Power Stroke V8 long block delivers the best value per mile of service. You get new-engine reliability and warranty protection at 40-60% less than a dealer-new engine. For commercial operators, the reduced downtime risk alone justifies the investment — a single breakdown can cost $1,000-$5,000 per day in lost revenue, towing fees, and emergency repair premiums.
Why not just repair? When an engine fails catastrophically (spun bearing, cracked block, dropped valve), repairing only the immediate failure leaves all other worn components in place. A 300,000-mile engine with new bearings still has 300,000-mile pistons, rings, and valve train. A remanufactured engine eliminates this risk by restoring everything to zero-mile condition.
Ford Power Stroke V8 6.7L Installation Guide & Tips
Installing a remanufactured Ford Power Stroke V8 6.7L long block is straightforward for an experienced diesel technician. Our engines are direct bolt-in replacements designed to use all existing accessories and emissions equipment from your original engine.
Estimated Installation Time
Pickup trucks: 10-16 hours. Vans and SUVs: 12-18 hours. Time varies based on 4WD vs 2WD, cab configuration, and emissions equipment.
Components to Transfer from Old Engine
The following components must be transferred from your old engine to the new long block:
- Turbocharger assembly (inspect and replace if worn)
- Fuel injectors (consider replacing if high mileage)
- Injection pump or fuel rail (inspect for wear)
- Intake and exhaust manifolds
- Alternator, starter motor, and A/C compressor
- Water pump and thermostat housing (recommend replacing)
- Power steering pump
- All sensors and wiring harness
- ECM/ECU (engine control module)
- Flywheel or flexplate (inspect for wear/cracks)
- EGR valve and cooler (clean or replace)
- DPF, DOC, and SCR components (emissions system)
Critical Installation Notes
- Prime the oil system — Before first start, prime the oil system by cranking without fuel (disconnect injector harness) until oil pressure registers. This prevents dry-start bearing damage.
- Fill cooling system slowly — Fill at a rate that allows air to escape. Use a vacuum fill tool if available to prevent air pockets that cause overheating.
- Verify all sensor connections — A single disconnected sensor can prevent starting or cause the engine to run in limp mode.
- Check all fluid levels — Verify oil, coolant, and DEF levels before first start.
- Follow break-in procedure — See the maintenance section above for critical first-500-mile break-in guidelines.
We provide free phone support at (631) 991-7700 during installation. Our technicians can walk you through any step of the process.
Ford Power Stroke V8 6.7L Engine History & Heritage
The 6.7L Power Stroke was Ford's first in-house diesel design, engineered specifically for the Super Duty platform with unique features like reverse-flow heads and inboard exhaust to optimize packaging, emissions, and serviceability.
Production of the Ford Power Stroke V8 spans 2011-present (6.7L), during which time the engine has been continuously refined and improved. At US Engine Production, we have been remanufacturing Ford engines for over 40 years. Our deep experience means we understand every revision, every common failure point, and every improvement opportunity for the Ford Power Stroke V8 platform.
Over the decades, we have remanufactured thousands of Ford Power Stroke V8 engines and have developed proprietary processes that address known weak points in the original design. This institutional knowledge — combined with our investment in precision machining equipment and testing facilities — is what allows us to produce remanufactured engines that often outlast the originals.
Whether you're replacing a failed engine in a Ford F-250, F-350, F-450 Super Duty or building a reliable power unit for a new application, our remanufactured Ford Power Stroke V8 delivers the quality and reliability that Ford intended — backed by our 1-year unlimited mileage warranty and over four decades of remanufacturing expertise.
Frequently Asked Questions About Ford Power Stroke V8 6.7L Remanufactured Engines
- How long will a remanufactured Ford Power Stroke V8 last?
- With proper maintenance, a remanufactured Ford Power Stroke V8 should deliver 200,000 to 400,000+ miles of reliable service — essentially the same lifespan as a brand-new engine from the factory.
- What warranty do you offer on the Ford Power Stroke V8?
- Every remanufactured Ford Power Stroke V8 long block comes with our 1-year unlimited mileage warranty. No mileage caps, no fine print. If anything fails due to a manufacturing defect within the warranty period, we cover it.
- What's the difference between remanufactured and rebuilt?
- A rebuilt engine only replaces obviously worn parts — leaving near-end-of-life components in place. A remanufactured engine is completely disassembled and every component is restored to OEM specifications or replaced with new. This is why remanufactured engines carry longer warranties and last longer.
- How quickly can you ship a Ford Power Stroke V8?
- Most engines ship within 24-48 hours of order confirmation. Delivery typically takes 3-7 business days via freight carrier to anywhere in the continental United States.
- Can I install this engine myself?
- While technically possible for experienced mechanics, we recommend professional installation by a qualified diesel technician. Proper installation is critical for warranty coverage and engine longevity. We provide free phone support during installation.
- Do you offer core return?
- Yes. We offer a core deposit refund when you return your old engine core within 30 days. The core must be complete (no missing major components) and returnable (not seized or damaged beyond remanufacturing). Core return shipping is arranged at our expense.